FRP Pultrusion Production Line

Product Introduction

Hydraulic reciprocating pultrusion equipment

FRP pultrusion production line technical data:
Mold mounting plate size: 1170x900x20mm
Mold length: 900mm
Mold mounting plate height can be adjusted: 0 ~ 80mm
Temperature control section: 4
Heating plate (upper and lower plate type) : effective width 400mm, length 840mm, thickness 40mm
Maximum size of traction clamping window: 1000mm (width) x300mm(height)
Upper and lower clamping table length: 400mm
Traction: 200-800kN
Pultrusion speed: 0.1-1.0m/min

Lead screw type FRP pultrusion production line

Technical parameter:
Mold mounting plate: 1000x1000mm
Maximum size of traction clamping window: 800mm (W)x300mm(H)
Linear guide pair: GGB55AA
Clamping stroke: 50mm
Servo drive motor power: 2×7.5kw
Pultrusion speed: 0.1~1.2m/min
Cutting mode: pneumatic compression, circular saw blade cutting
Saw blade speed: 1450rpm
Cutting length: adjustable size
Cutting feed mode: frequency conversion drive, speed, cutting stroke adjustable
Suction mode: Vacuum cleaner 1.5kW
Temperature control area: 8
Ball screw pair: FF10016-5
Clamping mode: oil pressure
Maximum gripping force of traction head: 120KN
Maximum traction: 120KN
Traction reciprocating stroke: 500mm
Cutting power: 3kW
Cutting range: 800mmx220mm
Tracking cutting mode: pneumatic tracking, reset
Clamping mode: double-sided cylinder clamping

FRP pultrusion winding production line

FRP pultrusion winding production line is the perfect integration of pultrusion process and winding process, overcoming the shortcomings of separate pultrusion process and winding process, so that the longitudinal strength and transverse strength have been greatly enhanced, and can make the winding pipe continuous production, significantly improve the production efficiency of the pipe.
Due to the uniform winding of glass fiber, fiber mat, fiber cloth and other reinforcing materials in the circumferential direction, the pressure resistance of the pipe is significantly improved.

Winding machine technical parameters:
Winding drum center height: 1130mm
Number of winding heads: 2/4
Maximum yamn size: 270mm
Winding distance: adjustable
Maximum winding diameter: 300mm
Number of yarn balls/each winding head: 4/8
Winding head speed: 0-55 rpm
Power: 2.2/4kW

Glass fiber composite bar production equipment

Technical parameters:
Oven (including winding device, unwinding device): 6m
Heating power: 20 KW
Traction speed: 0.1~1 m/min
Pulling block length: 500 mm
Vacuum power: 1.5 KW
Cutting mode: automatic/manual
Saw blade speed: 2850 r/min
Glass fiber bar production range: with a diameter of 6-30mm
Effective traction length: 1200mm
Traction: 60KN
Cutting power: 1.5KW
Maximum cutting section size: 500X85mm
Saw blade diameter: φ400/φ50

Fiberglass door and window profile extrusion equipment

Technical parameters:
Unit center height: 1000mm
Applicable air pressure: 0.4-0.6MPa
Effective traction length: 3000mm
Traction force: 100KN
Traction method: flat track type
Vacuum power: 1.5KW
Saw blade speed: 2850r/min
Cutting method: automatic/manual
Total power: 10KW
Air consumption: <20L/min
Traction speed: 0.1~1m/min
Traction block length: 300mm
Cutting power: 1.5KW
Maximum cutting section size: 300X85mm
Saw blade diameter: φ 400/ φ 50

Carbon fiber cable composite core production equipment

Technical parameters:
Yarn frame main body: The main body of the carbon fiber yarn frame is of steel structure. It can accommodate 120 spindles. Spindles are arranged in a matrix on both sides. Spindle outer diameter: φ75; Parallel spacing between spindle centers: 320mm.
Spindle accessories: Each spindle is equipped with a stop plate to prevent fibers from sliding onto the yarn shaft during rotation.
Fiber guiding: Each fiber bundle is equipped with a yarn guide device. A ceramic sleeve is installed on the inner wall of the yarn guide hole to prevent scraping and strand breakage.
Yarn frame chassis: The chassis is movable. The yarn frame remains stationary during operation and can move as a whole when not in use.
Pultrusion equipment: Carbon fiber composite core pultrusion equipment comes with a post – curing device. The composite core moves directly from the molding die to the post – curing unit for secondary heat curing.
Post – curing device: Total length of the post – curing heating zone: ≥2m; Heating zone length is adjustable.
Crawler tractor: Crawler tractor is adopted. Compression is achieved by air pressure. Traction force: 4 tons.
Layering material: Layering material: polyurethane. Babbitt hardness: ≥85.
Pneumatic components: High – quality pneumatic components are selected.
Traction speed: Traction speed: 0.1 – 1m/min, continuously adjustable.
Clamping space: 215 (W)×110 (H)mm.
Air pressure and consumption: Applicable air pressure: 0.4 – 0.6Mpa; Air consumption: ≤20L/min.
Take – up reel: Take – up reels are configured according to JB/T 7600.1 – 94 standard. Diameter of the wire reel side plate: 1500 – 2500mm.
Take – up function: Continuous take – up. Line speed: 0.1 – 1.0m/min, continuously adjustable.
Take – up drive: The take – up machine is driven by a torque motor and used in tandem with the traction machine. It can be controlled independently. The control system is equipped with an alarm system and an emergency stop device.

pultrusion molds

auxiliary equipments

Finished products

Company Profile

Hebei Aoliande Chemical Equipment Co.,Ltd. is a company specialized in production and sales of complete sets of chemical equipment, complete sets of fiberglass product production lines, and meantime manufacture composite material and SMC products. We have got the certificate of management system CE, ISO9001, ISO14001, ISO45001and SGS certificate. Our FRP production line and products have been sold to all over the world, including the United States, Canada, Australia, Brazil, Japan, Germany, Russia, India, Malaysia, Indonesia, Egypt and other countries, winning the support and trust of new and old customers.

EPC chemical equipment series: Mannheim process complete sets of potassium sulfate production equipment, sodium sulfate production equipment, complete sets of sulfuric acid equipment, complete sets of calcium chloride production equipment;
EPC complete sets of FRP product production line series: microcomputer controlled complete set of FRP pipes, FRP tank filament winding production line, complete set of FRP grating production line, complete set of FRP pultruded profile production line, SF/FF oil tank production line.
Fiberglass product series: high, medium and low pressure FRP pipe, FRP tank, FRP tower, Polymer concrete cells, SF/FF double-layer oil tanks, FRP cooling tower, FRP SMC/BMC molded products, FRP pultrusion profiles and other customized fiberglass products, FRP anti-corrosion project, etc.

Hebei Aoliande Chemical Equipment Co.,Ltd. not only have manufacture ability, but also has design ability of material, structure and products, our company can provide customers with technical advice, supply of goods and material, transportation, installation supervision etc service.